ABB AC 800M and S800 IO power supply SD853 3BSE088188R1

ABB AC 800M and S800 IO power supply SD853 3BSE088188R1

The SD85x Power supply units are designed for high efficiency, electronic inrush current limitation, wide operating temperature range, and extraordinarily small size. The lowest power losses and high lifetime expectancy deliver the lowest cost of ownership.

The SD85x series complies for use in potentially explosive atmospheres (IECEx Zone 2, ATEX Zone 2, and Class I Div 2). The SD85x series has a built-in power reserve and can easy breaking fuses due to high overload peak current capability.

Please contact me get more information

Email:Mia@cwlyautomation.com
VK/Whatsapp/Telegram:+8613667120925
Website:  www.cwlyautomation.com

General info
Article number    3BSE088188R1
Type    Power supply
Rated output current    10 A
Rated output power    240 W
Rated output voltage    24 V d.c.
Mains/input voltage, nominal    100-240 V a.c. 110-150 V d.c.
Applications    SELV and PELV
Efficiency    93.6/95.2 % @ 120/230 V a.c.

Detailed data
Mains frequency    50 - 60 HZ +/- 6%
Load sharing    Parallel connection
Supervision relay    Yes
Power Factor (at rated output power)    0.99/0.97
Heat dissipation    16.4 W / 12.1 W, 120/230 V a.c.
Output voltage regulation at max. current    max 50 mV 0 - 12 A
Maximum ambient temperature    70 °C
Primary: Recommended external fuse    10-20 A
Secondary: Short circuit    Hiccup (2s on 18s off)
Output over voltage protection    Max 32 V DC
AC input current    2.15 / 1.13 A
AC inrush current    6 A / 9 A peak

Please contact me get more information

Email:Mia@cwlyautomation.com
VK/Whatsapp/Telegram:+8613667120925
Website:  www.cwlyautomation.com

Environment and certification
CE mark    Yes
Electrical safety    IEC 60950-1
ATEX Zone 2    Yes
IECEx Zone 2    Yes
Hazardous Location, Class 1 Div 2    Yes
Hazardous Location    ATEX Zone 2: EN 60079-0, EN60079-15; IECEx Zone 2: IEC 60079-0, IEC 60079-15; CSA Class I Div 2, Groups A, B, C D T4: ANSI/ISA 12.12.01-2015, C22.2 No. 213-M1987
Marine certification    DNV-GL, ABS
Protection rating    IP20 according to IEC 60529
Corrosive atmosphere ISA-S71.04    G3
Pollution degree    Degree 2, IEC 62477-1
Mechanical operating conditions    IEC 61131-2
EMC    EN 61000-6-4 and EN 61000-6-2
Overvoltage Categories    Category III (IEC 62477-1 for altitudes up to 2000 m)
Equipment class    I PE (Protection Earth) connection required
Max ambient temperature    -25 °C (-13 °F) to +70 °C (158 °F), derating 6W / °C between 60 °C - 70 °C
RoHS compliance    DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance    DIRECTIVE/2012/19/EU

Dimensions
Width    39 mm (1.53")
Depth    117 mm (4.60")
Height    124 mm (4.88")
Weight (lbs.)    600 g (1.32 lbs.)
Mounting spacing W mm    15 mm (0.59")
Mounting spacing H mm    40 mm (1.57")

Features and benefits
DIN-rail mounting, Width 39 mm
Efficiency up to 95.2 %
20% Output Power Reserves
Easy Fuse Breaking due to High Overload Peak Current
Active Power Factor Correction (PFC)
Minimal Inrush Current Surge
Temperature range -25°C and +70°C (derating 6W / °C between 60°C - 70°C)
DC-OK Relay Contact
Class I Div 2, IECEx Zone 2 and ATEX Zone 2

Please contact me get more information

Email:Mia@cwlyautomation.com
VK/Whatsapp/Telegram:+8613667120925
Website:  www.cwlyautomation.com

ABB AC 800M and S800 IO voter SS822ZSS822Z 3BSC610055R1 
ABB AC 800M and S800 IO power supply SD854SD854 3BSE088189R1
ABB AC 800M and S800 IO power supply SD853SD853 3BSE088188R1 
ABB AC 800M and S800 IO power supply SD834SD834 3BSC610067R1 
ABB AC 800M and S800 IO power supply SD833SD833 3BSC610066R1 
ABB AC 800M and S800 IO power supply SD832SD832 3BSC610065R1
ABB AC 800M and S800 IO power supply SD831SD831 3BSC610064R1
ABB AC 800M and S800 IO power supply SD822ZSD822Z 3BSC610054R1
ABB AC 800M and S800 IO rechargeable battery unit SB822SB822 3BSE018172R1